Cutting Solution Home > Cutting Solution Products > Supergraph IV <Previous Next>
The Supergraph IV is a Plasma Cutting Machine able to cut mild steel, stainless steel, aluminum, copper, brass, and more. This machine is definitely packed with exciting features and benefits ready to increase efficiency, quality and your bottom-line profitability.
|
Downloads
Downloads
|
Specifications
Specifications
|
Options
Options
|
Where to Buy?
Where to Buy?
|
|
|
|
|
Specifications
| Cutting Table |
|
| Cutting Area |
6.6ft x 12ft (2m x 3m) ranging to 6.6ft x 20ft (2m x 6.1m),
other lengths optional; 2 piece construction for 20ft table only |
| Positioning Accuracy and Speed |
±0.005" at 1000 IPM maximum traverse speed |
| Torch Height |
Hypertherm Command THC or Innerlogic Inova |
| Ventilation |
Zoned Down Draft Table with automatic damper control |
| Sheet/Part Support |
Removable slat supports; Replaceable slats |
| Drive System |
Planetary Gearbox with 800 watt dual side drive AC servos |
| Table Strength |
Full table capacity of 1 inch plate |
| Table Type |
Unitized, single piece |
| Cutting Table Controller |
|
| Controller Type |
PC based |
| Hard Drive Capacity |
2.0 Gbyte minimum |
| Speed |
566 MHz Pentium processor with 256 Mbytes RAM |
| Communication Interface |
Optically isolated serial port with programmable baud rates to 115K |
| Parametric Library |
40 preprogrammed shapes with over 300 variations |
| Part/Sheet Storage Ability |
Yes |
| Program Format |
EIA (G-Codes) |
| Automatic Part/Plate Alignment |
Yes |
| Stand-alone Capability |
Yes |
| Plasma Power Unit |
Two Tool Maximum |
| Hypertherm |
Arcwriter
HD 4070
HPR 130 |
| Innerlogic |
Fineline 100
Fineline 200
Proline 2200 |
| Model |
Cut Width |
Cut Length |
Max. # Plasma Stations |
| SGIV 7812 |
6.5' |
12' |
1 |
| SGIV 7820 |
6.5' |
20' |
1 |
| SGIV 7824 |
6.5' |
24' |
1 |
| SGIV 9812 |
6.5' |
12' |
2 |
| SGIV 9820 |
6.5' |
20' |
2 |
| SGIV 9824 |
6.5' |
24' |
2 |
| CNC Controllers |
 |
Promotion KARCNCx
- Dual microprocessor technology provides true multi-tasking.
- Direct download from DXF files
- Easy part program creation and nesting
|
 |
Hypertherm Edge Pro
- New operators can be ready to cut production parts in less than 5 minutes thanks to the CutPro™ Wizard
- Durable glass touchscreen utilizing surface acoustic wave technology.
- Cutting applications include high definition, conventional, duct cutting, single- or dual bevel plasma capability, oxy-fuel, laser, and waterjet.
|
 |
Burny 10 LCD
- Upgraded CPU to mobile technology which constitutes an enormous increase in performance.
- 1GB of RAM is standard which vastly improves multitasking on the controller.
- The real-time subsystem was changed for a higher performing, more developer friendly system.
- CAP was added to help you more easily integrate the control into your systems.
|
| Height Controllers |
 Hypetherm Arc Glide
- Optimal consumable life and superior cut quality through arc voltage sampling and control
- Up to 100% improvement in parts cut per hour by minimizing cut-to-cut cycle time
- Installation using Hypernet, which simplifies operation and reduces installation time for single and multi-torch applications
- Extremely robust mechanics for high reliability, backed by a two year warranty
- True Hole™ technology capable for HyPerformance® Plasma HPRXD® installations
|
 Koike Sensor Height Control
- Completely Sealed Design for Harsh environments
- 40:1 Voltage Divider
- Accuracy Within .1 Arc Volts
- Completely Driven From CNC (No Pendants or Control Boxes)
|
 Hypertherm Command THC
- Max Z-axis speed 200 ipm
- Max. Z-axis stroke 8 inches
- Maximum control accuracy ±1 0.5volts
|
|
 Promotion IHC
- Automatically measures arc voltage in 0.02V increments
- With arc cutting stability much better than 1V, cut quality is precise and accurate
- Once set, an automatic system empowers the operator to perform other duties, saving time while increasing productivity.
|
 Kaliburn Inova THC
- Maximum retraction speed- 600ipm
- Cycle complete signal to notify x/y controller that the torch has retracted
- up to 8 torch stations
|
| Cutting Tables |
 |
Built in Zoned Downdraft Table
- Its modular design lets you add space as you need it.
- No electronic components
- Slat frames and Slag pans remove easily for cleaning
|
| Fume Extraction |
 |
Micro Air Fume Extraction Unit Features
- Roto-Pulse Filter Cleaning System
- Horizontal Filters
- Large Capacity Dust Hopper
- 7-1/2 HP Motor
- Motor Starter /Overload Protection
- After Pulse Cleaning Cycle
- Heavy Duty Construction
- Full Range of Options
|
To request more information or a quotation please contact us.
Please click here to find your local distributor.
|
